0
JKSMFG JKS6200 Front Control Arm Correction Brackets 2"-4.5" Lift Jeep Wrangler JK 07-18
| Quantity | 2 |
| Brand | JKS Manufacturing |
| Box Weight | 12.7 lbs |
| Box Length | 16.1 in |
| Box Width | 10.5 in |
| Box Height | 6.8 in |
| Position | Upper |
Please select your vehicle to ensure that this product fits.
Description
Improve the handling of your lifted Jeep Wrangler JK with JKS Front Control Arm Correction Brackets. Designed for use with 2"-4.5" lift kits the brackets improve control arm operating angle to mimic or improve on factory arm angles as well as improve anti-dive during braking. Lowering the control arm mounting point slightly places the arms closer to the axle mount which corrects caster and geometry caused by the lifted ride height. Two mounting hole positions correct geometry for given lift heights. Heavy duty, 1pc, fully boxed 7GA steel brackets install inside the factory upper and lower control arm mounts with the factory hardware. The fully gusseted design you extra confidence both on and off road. For ultimate performance, Control Arm Correction Brackets can be used with JKS adjustable control arms.
Features
- Correct control arm operating angle and mimic factory suspension geometry.
- Improve on-road handling and control.
- Corrects caster for 2"-4.5" of lift.
- Improves the front drive shaft CV joint operating angles.
- Made from heavy-duty 7GA steel and are fully boxed and welded for superior strength.
- Install inside the factory upper and lower control arm mounts with the factory hardware.
| Material | Steel |
| Type Parts | Brackets |
| Type Adjusters | Non Adjustable |
| Quantity | 2 |
| Brand | JKS Manufacturing |
| Box Weight | 12.7 lbs |
| Box Length | 16.1 in |
| Box Width | 10.5 in |
| Box Height | 6.8 in |
| Position | Upper |
| Fitment | 2007 Jeep Wrangler JK, 2008 Jeep Wrangler JK, 2009 Jeep Wrangler JK, 2010 Jeep Wrangler JK, 2011 Jeep Wrangler JK, 2012 Jeep Wrangler JK, 2013 Jeep Wrangler JK, 2014 Jeep Wrangler JK, 2015 Jeep Wrangler JK, 2016 Jeep Wrangler JK, 2017 Jeep Wrangler JK, 2018 Jeep Wrangler JK |
| Submodel | 4 Door, 2 Door |
| Lift Height, inch | 2"-4.5" |
| Installation side | Front |
| Type UCA | Stamped |
| Material | Steel |
| Type Parts | Brackets |
| Type Adjusters | Non Adjustable |
| Quantity | 2 |
| Brand | JKS Manufacturing |
| Box Weight | 12.7 lbs |
| Box Length | 16.1 in |
| Box Width | 10.5 in |
| Box Height | 6.8 in |
| Position | Upper |
| Fitment | 2007 Jeep Wrangler JK, 2008 Jeep Wrangler JK, 2009 Jeep Wrangler JK, 2010 Jeep Wrangler JK, 2011 Jeep Wrangler JK, 2012 Jeep Wrangler JK, 2013 Jeep Wrangler JK, 2014 Jeep Wrangler JK, 2015 Jeep Wrangler JK, 2016 Jeep Wrangler JK, 2017 Jeep Wrangler JK, 2018 Jeep Wrangler JK |
| Submodel | 4 Door, 2 Door |
| Lift Height, inch | 2"-4.5" |
| Installation side | Front |
| Type UCA | Stamped |
